Sunday, 28 May 2017
How To Paint A Design Directly On Your Wall
YOU'LL NEED:
Stencil
Measuring tape
Pencil
Painter's tape
Stencil brush
Latex paint
INSTRUCTIONS:
INSTRUCTIONS:
1. Measure and mark all the places you want to position the stencil. For our design, we repeated the stencil six times to create two vertical rows.
2. Tape the stencil in place using painter's tape.
3. Fill in the stencil using latex paint and stencil brush. For best results, dip and dab, don't sweep brush.
4. Leave the stencil in place while the paint dries (about 10 minutes). Apply a second coat. Let dry.
5. Remove the stencil and repeat steps 3 through 5 until you've created the design you desire.
via all you
How To Customize Your Lamp With Decorative Trim
Trim
Scissors
Lampshade
Hot-glue gun
INSTRUCTIONS:
1. Position trim as desired on shade.
2. Cut so that ends overlap ½".
3. Adhere trim to shade with dabs of glue from a hot-glue gun
via all you
DIY Rustic Coffee Table
YOU'LL NEED:
21 logs,
19" tall and 3" to 4" in diameter
Paper-covered wire
(available at garden stores)
Wire cutters
36" glass tabletop
INSTRUCTIONS:
1. Stand the logs in a cluster in front of the sofa.
2. Starting about 7" from the top, wrap the cluster tightly with the covered wire, encircling it six times.
3. Repeat approximately 5" from the bottom.
4. Place glass on top.
21 logs,
19" tall and 3" to 4" in diameter
Paper-covered wire
(available at garden stores)
Wire cutters
36" glass tabletop
INSTRUCTIONS:
1. Stand the logs in a cluster in front of the sofa.
2. Starting about 7" from the top, wrap the cluster tightly with the covered wire, encircling it six times.
3. Repeat approximately 5" from the bottom.
4. Place glass on top.
via all you
